IoT SENSORS For Multiple Business Solutions

Intellia MaxSonar INT-D-01

The IP67 rated Intellia MaxSonar sensor is factory calibrated to offer long-range monitoring of liquid level. It offers noise-free distance readings and provide long-range detection through high-accuracy and high-resolution ultrasonic proximity detection and ranging in air.

Quick Specifications
Measuring Parameters Level Monitoring
Operating Voltage 2.7V to 5.5V
Current Draw 2.3mA (peak ~49mA) at 3.3V, and 3.1mA (peak ~98mA) at 5V
Sensitivity High acoustic
Distance Sensor 30-cm to 5-meters or 50-cm to 10-meters based on model
Range Outputs All range outputs are active simultaneously

Intellia Bluetooth temp/RH Sensor INT-HT-01

Intellia Bluetooth temp/RH Sensor INT-HT-01 is temperature and humidity monitoring sensor is a small-sized, potable sensor which is used with temperature and humidity monitoring IoT solutions.

Quick Specifications
Measuring Parameters Temperature, Humidity
Dimension 50mm*50mm*16mm
Protocol standard Bluetooth 4.0
Output power 4dBm, adjustable
Communication rate 1Mbps
Transmission distance 55 meters, adjustable

Intellia Asset GPS Tracker INT-ALT-01

The only IoT device in the world that has customers in 32 countries. Wherever there is Sigfox network coverage, there is a Intellia Asset GPS Tracker. Proven and tried over the last two years, in a variety of applications and environmental conditions, the Intellia Asset GPS Tracker INT-ALT-01 the trailblazer that pushed the IoT revolution forward.

Quick Specifications
Measuring Parameters GPS, Temperature, Accelerometer
Connectivity Sigfox or NB-IoT, Wi-Fi, Bluetooth
Expansion 24 pins header – Breakout board – SDK
Dimensions L: 92mm; W: 35mm; H: 26mm
IP Certification IP65
Sigfox Regions Available for RCZ1 | RCZ2 | RCZ4

Intellia Wireless Weight Sensor INT-W-01

Intellia INT-W-01 is the Bluetooth enabled weight sensor and app for air suspension trucks and trailers that clearly displays your truck weight on your smart phone to help you load safely and legally.

Quick Specifications
Measuring Parameters Weigh
Model No INT-W-01
Connectivity Bluetooth
Battery Long Battery Life
Accuracy High
Reliability Long Lasting

Intellia INT-AApHT-01 LoRaWAN device

Intellia INT-AApHT-01 is a general LoRaWAN® device for measuring analog or digital signals. It is a 2-channel GPIO wireless transceiver and can also provide power to external sensors.

Quick Specifications
Measuring Parameters Temperature, Humidity, Accelerometer, Atmospheric pressure
Weight 60 g excluding batteries / 100 g including batteries
Dimensions 94 x 59 x 35 mm
Enclosure IP67
Direct connection to 1-wire temperature sensor, Decagon moisture sensor, S0 output
Temperature –40 to 60 °C (85 °C with external power supply)
Humidity Humidity 0 to 100% RH

Intellia Wireless Thermocouple Sensor INT-T-01

The Intellia Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F).

Quick Specifications
Measuring Parameters Temperature
Thermocouple Connection Options 6 ft hardwired probe / 5 ft K-type connector
Device Range Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*
Battery Type 2 Replaceable AA 1.5 V Batteries
Operating Frequency 900 MHz
Enclosure Material ABS

Intellia Wireless Motion Detection Sensor INT-M-01

The Intellia wireless motion detection sensor uses an infrared sensor to accurately detect movements made by people/animals within 15 ft (4.5 m) range.

Quick Specifications
Measuring Parameters Motion Detection
Sensing Range 16.4 ft. (5 m)
Current Consumption Type 170 µA Max: 300 µA
Wake-up Time 30 Seconds
Weight 3.7 oz.
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)

Intellia Wireless Open/Closed Sensors INT-O-01

The Intellia Wireless Open/Closed Sensor can be used to detect when a door or window is opened and closed using a magnetic switch.

Quick Specifications
Measuring Parameter Uses magnetic detection switch
Wireless range 1,200+ feet through 12+ walls
Supply voltage 2.0–3.8 VDC *
Current consumption 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode
Operating temperature range -7°C to +60°C (20°F to +140°F)
Operation gap Up to 3/4 inch

Intellia Wireless Dry Contact Sensors INT-Dc-01

Intellia wireless dry contact sensors can be used to detect contact between two wired contact points, an external mechanical switch or a contact plate.

Quick Specifications
Measuring Parameter Detect contact between two wired contact points
Lead Wire Length 1 ft. ( 12 in.)
Detection Wires High Impedance
Dimension 4.375 in x 2.470 in x 1.12 in
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
Enclosure Material ABS

Intellia Vehicle Detect / Counter Sensor INT-Vd-01

The Intellia wireless vehicle detect/counter sensor can be deployed to detect the presence of a vehicle or count oncoming traffic utilizing a 9 ft. pneumatic tube.

Quick Specifications
Measuring Parameter Detect presence of vehicle
Dimension 4.528 in x 3.543 in x 3.155 in
Supply Voltage 2.0 - 3.6 VDC
Max Operating Temperature -40°C to +85°C ( -40°F to +185°F )
Power Supply Magnet included with accessories
Supply Voltage 2.0 - 3.8 VDC

Intellia Wireless Ultrasonic Sensors INT-D-02

Intellia industrial ultrasonic sensors can be used in a variety of applications for measuring distances between the sensor and objects in its path.

Quick Specifications
Measuring Parameter Measure distances between the sensor and objects in its path
Resolution 1 centimeter
Minimum Distance 10 centimeters
Maximum Distance 400 centimeters
Accuracy 5% FS (can be calibrated for further accuracy)

Intellia Wireless AC Voltage Detection Sensors (4–500 VAC) INT-Vod-01

The Intellia wireless AC voltage detection sensor can interface with other devices to detect voltage from 4 VAC to 500 VAC.

Quick Specifications
Measuring Parameter Detect the presence or absence of electricity.
Absolute Maximum Voltage 600 VACrms / 850 VDC
Minimum Voltage Detected -850 VDC
Accuracy +/- (1 VACrms + 3% of reading)
Response Time 40 ms
Resolution .25 VACrms / .35 VDC/Peak Voltage

Intellia Wireless Pulse Counter - Single Input Sensor INT-Pul-01

The Intellia wireless pulse counter can be connected to the pulse output of a system (water meter, power meter, etc.) to count the number of actuations within a given time frame.

Quick Specifications
Measuring Parameter Integrated with a dry contact or mechanical switch to count the number of actuations occurring within a given time frame.
Maximum Count 4294967296 (32 bit number)
Input Voltage 0 to 15 Volts DC
Detection Wires High Impedance (2-Wire), 3 ft. length
Counter Operation Positive and / or Negative Edge Pulses
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)

Intellia Wireless Humidity Sensors INT-H-01

The Intellia Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure.

Quick Specifications
Measuring Parameter Monitor the relative humidity of the air within a room or enclosure.
Accuracy ± 3% under normal conditions ( 10% - 90% RH )
RH Operating Range 0 – 100% RH
RH Response Time 3.7 oz.
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Dimension 4.375 in x 2.470 in x 1.12 in

Intellia Wireless Carbon Monoxide (CO) Sensor INT-Gas-01

The Intellia Wireless Carbon Monoxide (CO) sensor allows you to monitor the level of carbon monoxide (CO) gas in the surrounding air. Measures CO levels in surrounding air.

Quick Specifications
Measuring Parameter Carbon Monoxide (CO)
Operating Pressure Range ± 0.2 atm (recommended)
Operating Humidity Range 15 to 95% RH
Measuring Range 0-1000 PPM
Measuring Principle Electrochemical Oxidation of CO
Response Time < 40 seconds typical at 20°C

Intellia Wireless Air Velocity / Speed Sensor INT-Av-01

The Intellia wireless air speed sensor measures the pressure difference between two input ports, the temperature, and altitude determines the speed at which the air is moving in a system and transmits the measurement to Intellia Dashboard.

Quick Specifications
Measuring Parameter Distance, Temperature, pressure
Pressure Range -500 Pa to 500 Pa
Allowable Overpressure 100 kPa
Rated Burst Pressure 500 kPa
Max Humidity for Long-Term Exposure 40°C dew point

Intellia Wireless Hydrogen Sulfide (H2S) Gas Sensor INT-Gas-03

Intellia Wireless Hydrogen Sulfide (H2S) Gas Sensor

Quick Specifications
Measuring Parameter Hydrogen Sulfide Gas
Maximum Overload 50 PPM
Measuring Principle Electrochemical reaction of H2S
Resolution ± 0.1 PPM
Response Time (t-90) < 40 seconds typical at 20°C
Stabilization Time < 120 seconds
Long Term Drift – Zero Zero Signal = ± 2 PPM / month

Intellia Wireless Carbon Dioxide (CO2) Sensor INT-Gas-02

The mems based wireless carbon dioxide sensor allows you to monitor the level of carbon dioxide (CO2) gas in the surrounding air.

Quick Specifications
Measuring Parameter Carbon Dioxide (CO2)
Sample Method Diffusion
Measuring Range 0 to 10000 ppm CO2
Accuracy +/-( (45 ppm + 3%) * (1 + .0013 *? P))
Calibration Autocalibration
Non-Linearity < 1% of FS
Pressure Dependence 0.13% of reading per mm Hg in normal atmospheric conditions
intellia-ultrasonic

Price: $30

Intellia Bluetooth 4.0 Smart Wireless Sensor INT-ALuT-01

Intellia Bluetooth 4.0 Smart Wireless Sensor - Low Profile, 100-meter Line of Sight performance. This sensor allows you to manage all of your BLE home Bluetooth 4.0 Low Energy (Bluetooth Smart) wireless sensors and home automation devices. It provides a user friendly and interactive way to monitor (via alerts), configure, and control your surroundings.

Quick Specifications
Measuring Parameter Temperature, Luminosity, Accelerometer
Battery 1 CR2032 3V lithium battery
intellia-ultrasonic

Price: $144

Intellia Bluetooth Temperature/Humidity Sensor INT-HT-02

Have confidence in the safety and quality of your therapeutics, foods, and chemicals using our temperature and relative humidity instruments.

Quick Specifications
Measuring Parameter Temperature, Humidity
Functional Range -20 to 60 °C (-4 to 140 °F), 0 - 100% RH
Operating Range -20 to 60 °C (-4 to 140 °F), 5 to 80% RH
Wireless Range up to 30m ( 100 ft )
Battery Life 1.5 to 5 years
Accuracy ± 0.5 °C, ± 2% RH typ., ± 5% RH max.
Memory 80,000 data points (40k Temp + 40k RH)
intellia-ultrasonic

Price: $80

Intellia LoRaWAN Device INT-ALuT-02

Intellia LoRaWAN device is the perfect LoRa node to start prototyping your ideas without having to deal with bread boards, wires and sensors. Intellia LoRaWAN device is based on the SparkFun Pro Micro and has an added Microchip LoRaWAN module along with an embedded antenna. It contains a temperature sensor, digital accelerometer, light sensor, button and RGB LED. All this is packaged in a matchbox sized waterproof casing. This version operates on the US approved frequency 915MHz.

Quick Specifications
Measuring Parameter Temperature, Accelerometer, Luminosity, Actuator(Button)
Range Wireless range of up to 10 km (6 miles)
Frequency Operates at 915MHz for use in the US (FCC Approved)
Compatibility Fully compatible with Arduino devices and software
Library Included LoRaWAN
Integration Easy cloud integration with popular IoT platforms

Intellia Ultrasonic Fuel level sensor INT-Level-01

Intellia ultrasonic fuel level sensor INT-Level-01 is perfect solution for monitoring the fuel level and fuel consumption of commercial vehicles and also the liquid level of stationary tanks, etc.

Quick Specifications
Measuring Parameter Level Monitoring
Measuring Range 2-80cm / 2-200cm (optional)
Protection Rate IP67
Serial Port Output RS232 \RS485 \Analog
Power Consumption Typical -0.45W / Sleep mode -0.04W
Operational Temperature -20°C to -65°C

Intellia Industrial Wireless Water Detection Sensor INT-Wa-01

Intellia wireless water detection sensors alert you via SMS text and/or email when there is water detected, preventing potential property damage that results from flooding or leaks. This sensor can also be used to detect a lack of water, allowing you to know when a container is nearing empty.

Quick Specifications
Measuring Parameter Water presence
Detection Wires High Impedance
Max Operating Temperature -40° to 85°C (-40° to 185°F)
Device Range 300 - 350 ft. non-line-of-sight device range*
Battery Type Replaceable 3.6V, 1800mAH (single AA sized)
Supply Voltage 2.0 - 3.6 V

Intellia Wireless Serial Data Bridge INT-RS-01

Intellia new Wireless Serial Data Bridge is a bidirectional serial to radio device capable of transmitting serial data over its wireless communication link and delivering wireless data, received in the radio, out of its serial port.

Quick Specifications
Measuring Parameter Bridge between RS-485 or RS-232
Current Consumption RS232: 38.9 mA | RS485: 51.2 mA
Operating Temperature -40° to 85°C (-40° to 185°F)
Max Bandwidth 1 Packet/Second (Max Packet Size – 24 bytes)
Serial Buffer 1280 bytes
Supported Baudrates 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400

Intellia Wireless Ultrasonic Sensor - INT-D-05

Intellia Wireless ultrasonic sensors can be used in a variety of applications for measuring distances between the sensor and objects in its path. Intellia ultrasonic sensors are impervious to target surface and color, and feature auto-calibration algorithms which allow them to adapt to variable environmental conditions and compensate for temperature and humidity effects. The ultrasonic sensors can also be calibrated through the Intellia IoT Platform for greater accuracy in distance measurements.

Quick Specifications
Measuring Parameter Measure the distances between the sensor and objects in its path, up to 4m.
Minimum Distance 10 centimeters
Maximum Distance 400 centimeters
Accuracy 5% FS (can be calibrated for further accuracy)
Battery Type 2 Replaceable AA 1.5 V Batteries
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)

Intellia Hydrogen Sulfide (H2S) Gas Detector INT-Gas-04

Intellia Hydrogen Sulfide (H2S) Gas Detector Sensor

Quick Specifications
Measuring Parameter Hydrogen Sulfide (H2S)
Weight 3.6 to 4.1 oz. / 103 to 116 g, depending on installed sensor
Humidity 0% - 95% RH (non-condensing)
Alarms and Type Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, non-compliance
Ingress Protection IP66/68
Typical Battery Life 12 months (6 months for 1-Series O2)

Intellia Wireless Pulse Counter - Single Input Sensor INT-Pul-02

Intellia wireless pulse counters can be integrated with a dry contact or mechanical switch to count the number of actuations occurring within a given time frame.

Quick Specifications
Measuring Parameter Integrated with a dry contact or mechanical switch to count the number of actuations occurring within a given time frame.
Input Voltage 0 to 15 Volts DC
Detection Wires High Impedance (2-Wire), 3 ft. length
Counter Operation Positive and / or Negative Edge Pulses
Weight 3.7 oz
Operating Frequency 900 MHz Operating Frequency
intellia-waterproof-ultrasonic-water-liquid-level-sensor-int-d-03

Price: $180

Intellia Waterproof Ultrasonic Water Liquid Level Sensor INT-D-03

Intellia Ultrasonic Water Liquid Level Sensor is used to measure the level of water up to 30m long range. It is used at the well depth, Power station, Stirred tank, Sewage tank, Biogas tank, pools and more.

Quick Specifications
Measuring Parameter Level Monitoring
Measuring Range Min:0.06 Max:30.0meter
Power supply 12~24V;220V(Optional)
Communication Hart or RS485 Optional
Accuracy +/-0.3%
Operating surroundings Normal temperature and Normal pressure
intellia-fuel-level-Sensor-int-d-04

Price: $216

Intellia Fuel level Sensor INT-D-04

Intellia Fuel level sensor INT-D-04 is used for monitoring the fuel level and fuel consumption fuel tanks. It can measure the level of max depth of tank 70cm.

Quick Specifications
Model No: INT-D-04
Measuring Parameter Level monitoring
Measuring Range Max 70cm
Communication Protocol with Gateway Bluetooth
Application Fuel theft detection, Fuel usage monitoring
Battery life 5-10 years

Intellia Wireless Accelerometer - Advance Vibration Meter INT-AT-01

The Intellia Wireless Advanced Vibration Meter uses an accelerometer to measure vibration and frequency on 3 axes. The sensor reports vibration (acceleration, velocity, displacement, or acceleration peak), frequency (Hz/RPM), and crest factor on all three axes. It also reports duty cycle (how much of the report interval that vibration was present), and temperature.

Quick Specifications
Measuring Parameters Vibration, Frequency, Temperature
Vibration Intensity Threshold Resolution 0.001 mm/s^2, 0.01 mm/s, .01 mm
Frequency Measurement Resolution 0.1 Hz
Thermistor Operating Range -40°C to +125°C ( -40°F to +257°F ) / 0.1 C (0.1 F)
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Weight 3.7 ounces

Intellia Wireless AC Current Meter – INT-C-01

Intellia wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system.

Quick Specifications
Measuring Parameters Electricity
Accuracy +/- 2% @ 2 to 150 Arms, +/- .4 Arms @ < 15 Arms
Current Transducer Frequency Range 50 – 100 Hz
Absolute Max CT Current 200 Amps RMS (Arms)
Maximum Accurate CT Current 150 Arms
Offset Limits -1.27 to + 1.27 Arms (default set to +.3 Arms)

Intellia Wireless Light Meter INT-Light-01

Intellia wireless light meters measure the intensity of light in lux (luminescence/unit area), from 0 – 83,000 lux (indoor range). Perfect for light sensitive applications like museum and art gallery light monitoring. User customization allows you to set the frequency of readings and the ability to set thresholds for notifications and alerts by SMS text, email or voice call from the system.

Quick Specifications
Measuring Parameter Measure the intensity of light in lux (luminescence/unit area)
Sensing Technology High Sensitivity Photodiode
Sensor Material Silicon
Peak Wavelength 580 nm
Maximum Reverse Voltage 6 V
Maximum Power Dissipation 40 mW
Maximum Light Current 500

Intellia Industrial Wireless Three Phase Current Meters INT-C-02

The Intellia Industrial Wireless Three Phase Current Meter measures the RMS current of an alternating current (AC) system using 3 current transformers (CTs) that wrap around the wires of a three phase power system.

Quick Specifications
Measuring Parameter Measures the RMS current of an alternating current (AC) system using 3 current transformers
Absolute Max CT Current 200 Amps RMS (Arms)
Maximum Accurate CT Current 150 Arms
Frequency Measurement Range 50–100 Hz
Accuracy +/- 2% @ 2 to 150 Arms, +/- 0.4 Arms @ < 15 Arms
Dimension 67 mm x 49 mm x 42 mm (24 mm inner diameter)

Intellia Wireless 500 VAC Voltage Meters INT-Vo-01

The Wireless 500 VAC Voltage Meter is an analog measuring device that reports the measured VACrms on user specified intervals.

Quick Specifications
Measuring Parameter measure the voltage off another device, battery, or sensor.
Response Time 40 ms
Resolution .25 VACrms / .35 VDC/Peak Voltage
Absolute Maximum Voltage 600 VAC RMS
Accuracy +/- (1 VAC RMS + 3% of reading)
Resolution 25 VAC RMS

Intellia Wireless Air Quality - PM 2.5 um Meter INT-Aq-01

The Intellia wireless PM2.5 um meter measures PM1, PM2.5 and PM10 concentrations in the air and transmits the measurement to Intellia. The sensor measures PM content using a laser that scatters based on the number and size of particles suspended in the air.

Quick Specifications
Measuring Parameter Measures PM1, PM2.5 and PM10 concentrations in the air
Operating Temperature -10°C to 60°C
Operating Humidity Range 0 to 99%
Response Time ~10 Seconds
Active Current ~180 mA @ 3.3 battery voltage, ~0.6 W overall
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)

Intellia Wireless Pressure Meters INT-P-01

Intellia wireless pressure meters measure pressure and transmit the pressure measurement to Intellia Dashboard.

Quick Specifications
Measuring Parameter Pressure
Media Gas, Liquid or Vapor
Operating Temperature 0 to 175°F (-18 to 79°C)
Thermal Effect on Reading ±0.02% FS/°F. (includes zero and span)
Response Time 50 msec.
Stability 1.0% FS/year (Typ.)
Wire Length 1 Meter shielded cable (between gauge and wireless unit)
intellia-ultrasonic

Price: $276

Intellia Pi Energy Meter INT-CPulTVrms-01

The Intellia Pi energy meter has been designed with community input to be easy to setup and install while still retaining maximum hackability and customisation for many different types of applications: home energy monitoring, solar PV monitoring, heat-pump monitoring and temperature & humidity monitoring.

Quick Specifications
Measuring Parameter Current, Temperature, VRMS, Pulse
Communication Requires WiFi / Ethernet plus 2 x power outlets
Extend functionality MQTT, NodeRED, OpenHAB
Certification CE certified
Monitoring Real Time
Phase 2 x single-phase AC circuits using clip-on CT sensors
intellia-ultrasonic

Price: $48

Intellia TH Energy Meter INT-HT -03

Intellia TH is an open-source, wireless, battery powered temperature and humidity monitoring node. It is an easy to deploy tool for monitoring building / room temperature and humidity.

Quick Specifications
Measuring Parameter Temperature, Humidity, External Temperature (probe)
Power 2 x AA from on-board holder, LTC3525 3.3V DC-DC boost converter to extend battery life
RF Radio RFM69CW 433Mhz
Battery Life 3 year+ battery life
External dimensions 71 x 71 x 27 mm
Power supply 1.9V - 3.6V

Intellia Valve Control Meter INT-Valve-01

Once the Intellia valve control is added to your network, you are able to close and open the valve from your mobile device or a computer. Depending on your Intellia gateway's home automation software you may be able to associate Intellia valve control device in groups with other Intellia devices to schedule scenes or create events. Example: if a water sensor detects water your gateway will send a signal to shut the water valve off. Or, you'll be able to turn your vacation home water valve on or off remotely.

Quick Specifications
Measuring Parameter Actuator (valve)
Frequency 908.42 MHz (US)
Power 12V/1A
Wireless Range Up to 100 feet line of sight
Installation Indoor only
Weight 1lb 13oz
intellia-ultrasonic

Price: $60 - $100

Intellia LoRa Wireless Water Meter INT-Water-01

Intellia LoRa Wireless Water Meter is able to automatically read the metering data via wireless remote network and control the close and open of the valve. It transforms information of conventional mechanical water meter into electrical signal that stored by micro-electronics control circuit.

Quick Specifications
Measuring Parameter Water Consumption
Temperature class T30,T90
Pressure class MAP10
Accuracy class Class 2
Static current uA <10
Environmental class Class B
Nominal Daimeter DN15 to DN25

Intellia Wireless 0-50 VDC Voltage Meter INT-Vo-03

Intellia industrial wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 50 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Quick Specifications
Measuring Parameter Voltage Measurement
Supply Voltage 2.0 - 3.6 VDC (3.0 - 3.6 VDC Using Power Supply) *
Current Consumption 0.7 µA (sleep mode) 2 mA, (radio idle/off mode) 2 mA, (measurement mode) 25 mA, (radio RX mode) 35 mA, (radio TX mode)
Wireless Range 250 - 300 ft. (Indoors / Through walls, ceilings & floors) Range may vary according to environmental variables.
Accuracy +/- 3% FS****
Absolute Maximum Voltage 75 VDC ***

Intellia Wireless 0-5 VDC Voltage Meters INT-Vo-02

The Intellia Wireless Voltage Meter are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 5 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Quick Specifications
Measuring parameter Measures the voltage
Supply voltage 2.0–3.8 VDC (3.0–3.8 VDC using power supply) *
Current consumption 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode)
Voltage range 0–5 Volts DC**
Accuracy +/- (0.006 VDC + 3.0% of Reading)
Wireless range 1,200+ ft non-line-of-sight
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)

Intellia Wireless Control - 30 AMP - INT-Ctl-01

Intellia wireless control units contain two separate relay switches allowing for individual control through the Intellia IoT online portal.

Quick Specifications
Measuring Parameter Use to control two separate power relays
Input Power 5.5 VDC @ 900 mA
Operating Temperature -40° to 85°C (-40° to 185°F)
Number of Relays 2 (individually controlled)
Wireless Range 1,000+ ft. non-line-of-sight ***
Antenna Connector: SMA Gain (dBi): 3.0

Intellia Wireless 0-200 VDC Voltage Meters INT-Vo-04

Intellia wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 200 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Quick Specifications
Measuring Parameter Use to measure the voltage off another device, battery, or sensor. (0-200 VDC)
Full Scale Voltage 0-200 VDC
Operating Temperature -40° to 85°C (-40° to 185°F)
Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
Enclosure Material ABS
Operating Frequency 900 MHz Operating Frequency

Intellia Industrial Wireless Three Phase Current Meters 500AMP INT-C-03

The Intellia Industrial Wireless Three Phase Current Meter (500 Amp) measures the RMS current of an alternating current (AC) system using 3 current transformers (CTs) that wrap around the wires of a three-phase power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and duty cycle for each phase and the combined amp hours of all three phases to the Intellia IoT. The Intellia IoT is capable of generating watt hour or kilowatt hour readings as well based on a user specified RMS voltage.

Quick Specifications
Measuring Parameter Measures the RMS current of an alternating current (AC) system using 3 current transformers up to 500 Amps
Frequency Measurement Range 50 - 100 Hz
Accuracy +/- 2% @ 2 to 500, +/- 0.4 A rms @ < 15 A rms
Weight 28.7 oz
UL Rating UL Listed to UL508-4x specifications
Battery Type Replaceable 3.6V, 1800mAH (single AA sized)

Intellia Cellular Gateway INT-LoRaCell-01

The Intellia International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes integrated with Intellia’s wireless access point network (WAN) for use with all Intellia wireless sensors. This cellular gateway is available with or without an International cellular data plan.

The International 3G Cellular Gateway also features a backup battery that allows the device to continue operating for up to 24 hours in the event of a power failure, ensuring that your sensors are able to communicate with the monitoring software.

Quick Specifications
Device Memory 50,000 sensor messages
Operating Temperature -10 to +45°C (14 to 113°F)
Storage Temperature -20 to +60°C (-4 to 140°F)
Wireless Range 1,000+ ft. non-line-of-sight
Security Encrypt-RF™ (256-bit key exchange and AES-128 CTR)
Cellular Technology UMTS (Frequency Range): 850 / 1700 / 1900 MH

Intellia Ethernet Gateway INT-LoRaEth-02

Intellia Ethernet Gateways allow your Wireless Sensors to communicate with the Intellia IoT Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

Quick Specifications
Input Power 5.0 VDC @ 1A
Operating Temperature -20 to 55 °C (-4 to 131 °F)
Transmit Power 25 mW (900 MHz), 17 mW (868 MHz), 6.3 mW (433 MHz)
Wireless Range 1,200+ ft. non-line-of-sight *
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)

Intellia Ethernet Gateway INT-LoRaCell-02

The Intellia International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes integrated with wireless access point network (WAN) for use with all Intellia wireless sensors. This cellular gateway is available with or without an International cellular data plan.

The International 3G Cellular Gateway also features a backup battery that allows the device to continue operating for up to 24 hours in the event of a power failure, ensuring that your sensors are able to communicate with the monitoring software.

Quick Specifications
Device Memory 50,000 sensor messages
Cellular Carrier 3G UMTS / GSM / GPRS fallback Frequency Range: 800/850, 900, 2100 MHz
Storage Temperature -20 to +85 °C (-4 to 185 °F)
SIM Card Compatibility Mini-SIM (2FF) 25 mm x 15 mm x 0.76 mm
Operating Frequency 868 MHz Operating Frequency
Device Range Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*

Intellia Ethernet Gateway INT-LoRaEth-03

The Intellia Ethernet gateway allows your Wireless Sensors to communicate with the Intellia IoT Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the Intellia IoT Platform.

Quick Specifications
Device Memory 16,000 sensor messages
Hardware 10/100 Ethernet Controller
Storage Temperature -20 to +85 °C (-4 to 185 °F)
IEEE Standard Compliance 802.3-2002
Protocols Supported UDP, DHCP, TCP, SNMP, Modbus
Power Supply 5.5 V AC adapter

Intellia Serial Modbus Gateway INT-LoRaMOD-01

The Intellia Serial Modbus Gateway acts as a data concentrator for Intellia wireless sensor networks. This device incorporates Access Point Node (APN) and Serial RS-232C and RS-485 Interfacing hardware.

Quick Specifications
Device Range Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*
Operating Frequency 900 MHz Operating Frequency
Enclosure Material Durable, Impact-Resistant UV Stabilized Polycarbonate (IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12 and 13 Rated)
Input Voltage 4.5 – 36.0 VDC
Protocols Supported Jumper for RS-232 and RS485
Antenna Connector: RP-SMA Gain: 5.0 dBi Standard
intellia-bluetooth-gateway-int-blecell-03

Price: $336

Intellia Bluetooth Gateway INT-BLECell-03

Intellia Bluetooth Gateway INT-BLECell-03 helps is harsh or outdoor environments including a screen optimized for use in direct sunlight or when wet and a battery that lasts.

Quick Specifications
Measuring parameters Accelerometer, Proximity Sensor, Ambient Light, Sensor, Compass, GPS
Communication Protocol Bluetooth 4
Communication Protocol with Internet Cellular/ Wi-Fi
Waterproof Yes (Completely waterproof up to 1.2m for 35 minutes)
Real-Time data Yes
intellia-bluetooth-gateway-int-blecell-04

Price: $480

Intellia Bluetooth Gateway INT-BLECell-04

Intellia Bluetooth Gateway INT-BLECell-04 is designed to support rugged lifestyles and survive tough, challenging environments, either on construction sites, farms or extreme, outdoor environments.

Quick Specifications
Measuring parameters Accelerometer, Proximity Sensor, Ambient Light, Sensor, Compass, GPS
Communication Protocol with sensor Bluetooth 4
Communication Protocol with Internet Cellular/ Wi-Fi
Waterproof Up to 2m
IP certification IP68
Real Time data yes
intellia-ethernet-lorawan-gateway-int-loraeth-01

Price: $420

Intellia Ethernet LoRaWAN Gateway INT-LoRaEth-01

Intellia Ethernet LoRaWAN Gateway INT-LoRaEth-01 enables devices such as sensors and embedded computers to connect to the internet. With an easy to connect process, you are creating the most substantial aspect of your IoT data network.

Quick Specifications
Wireless Range Up to 10KM
Communication Protocol with Sensor LoRaWAN
Communication Protocol with Internet Ethernet
Operation Range 868MHz for use in the EU and 915Mhz for use in US